How to install the submersible level transmitter?

1. When the liquid level transmitter is installed in a static deep well or pool, the steel pipe is usually fixed in the water, and then the submersible level transmitter ULB6-a is put into the steel pipe and can be used.

2. When measuring the level of flowing or stirring liquid, the steel pipe (with a number of small holes punched at different heights of the pipe on the opposite side of the liquid flow direction so that the water enters into the pipe smoothly) is fixed in the water, and then the level transmitter is put into the steel pipe for use, which can effectively reduce the impact of the differential pressure change of the water flow on the measurement;

3. The level transmitter ULB16 should be installed vertically, and the installation position should be far away from the liquid outlet and agitator;

4. For use in applications with high vibration, the steel wire can be wrapped around the transmitter to utilize the wire to dampen the vibration so as not to pull off the cable wires.

For details, please contact Qi Huang