Temperature transmitter

How to Maintain Temperature Transmitters?

Regular Cleaning: Dust, dirt, corrosive substances, and other contaminants may accumulate on the housing and probe of UTB3 temperature transmitters , affecting their performance and lifespan. Therefor

How to Select a Temperature Transmitter

Determine the measurement range: The temperature transmitter selection is based on the highest/lowest temperature of the measured medium (e.g., -200°C to 1600°C). It is recommended that the ac

Control the Temperature by Using Pt100 Temperature Sensors

Pt100 thermal resistor changes resistance value according to the measured temperature and converts temperature into Pt100 signal or analog current / voltage signal. The control circuit receives the ou

Whether the Temperature Transmitter Reading can be Affected by the Weather Ch...

Imagine the temperature transmitter is exposed to sun light in summer. Will it cause the reading to be high than real temperature of fluid? The compensated temperature range of our temperature circuit

Thermal Conductivity Paste

A thermal conductivity paste may be used when using a thermowell to protect the temperature transmitter. It is used to fill any gap between the tip of the sheath and the end of the bore in the thermow

What sectors should be considered when select a temperature transmitter?

When selecting a temperature transmitter, several factors should be considered, including the temperature range required, the accuracy needed, the output signal required, and the environmental conditi

Common Thermowell Types

Thermowell is an important part in all temperature measurement applications. It can isolate the measurement process from the surrounding environment. It can not only protect the environment and worker

How PT100 Sensor Works

Temperature is of key industrial process parameters, and temperature measurement accounts for more than 30% of the total measurement points. Foundamentals of temperature measurement is RTD, resistance

Common Faults of Temperature Transmitters

Common faults of temperature transmitters are as follows: 1.The output of the transmitter does not change when the temperature of the measured medium rises or falls. This situation is mostly due to th