Silicon Pressure Transmitter
●Wide measuring pressure range:-1...0~0.1...1000bar.
●Against thunder stroke, against radio-frequency interference.
●Full stainless steel construction.
●Reversed-polarity, transient current & voltage protection.
●Suitable for the measurement of low pressure and vacuum pressure.
●Anti-corrosion, anti-attrition, anti-impact.
Silicon Pressure Transmitter
Description of silicon pressure transmitter
Based on piezo-resistive silicon technology, UPB1 silicon pressure transmitter uses isolated stainless steel diaphragm pressure sensor as sensing element. By adopting high performance IC, its amplifier circuit is built in stainless steel housing, to transform sensor mV signal into standard output signal. The pressure range of UPB1 model is very wide from 1bar~0, 0~0.1 till 1000bar, and the pressure types include vented gauge pressure, absolute pressure and sealed gauge pressure. This silicon pressure transmitter features integrated construction, high measuring accuracy, good long term stability, and it is suitable for pressure measurement in general industry applications.
UPB1 silicon pressure transmitter is widely used for pressure measurement and control of petroleum, chemical- industry, metallurgy, power station and hydrology, etc.
Types of silicon pressure transmitter
PVC cable connector Aviation connector
DIN connector M12 connector
PG7 connector Water-proof connector
LED display LCD display
Features of silicon pressure transmitter
●Wide measuring pressure range:-1...0~0.1...1000bar
●Against thunder stroke, against radio-frequency interference
●Full stainless steel construction
●Reversed-polarity, transient current & voltage protection
●Suitable for the measurement of low pressure and vacuum pressure
●Anti-corrosion, anti-attrition, anti-impact
Specifications of silicon pressure transmitter
| pressure medium | gas or liquid compatible to stainless steel |
| pressure ranges | -1...0~0.1...1000bar |
| pressure type | gauge(G), absolute(A), sealed gauge(S) |
| overload pressure | 150%FS |
| output signal | 4~20mA, 0~5V, 0~10V, 1~5V,0.5~4.5V |
| accuracy | 0.1%FS,0.25%FS(standard), 0.5%FS |
| load resistance | RL=(U-12V)/0.02A (4~20mA current output) U—loop voltage（V） |
| long-term stability | <0.2%FS/year |
| supply voltage | 12~36VDC |
| compensated temperature range | -10~+70℃ |
| operating temperature range | -30~+100℃ |
| storage temperature range | -40~+120℃ |
| temperature coefficient of zero | 0.2%FS/10℃ |
| temperature coefficient of span | 0.2%FS/10℃ |
| insulation resistance | 100MΩ@50VDC |
| process connection | G1/2 or others |
| electrical connection | DIN43650 or others |
| material of wetted part | 1Cr18Ni9Ti |
| material of pressure membrane | 316L |
| material of housing | 1Cr18Ni9Ti |
| sealing | n-Butyronitrile or fluoro-rubber sealing ring |
Previous: Ceramic Pressure Transmitter
