Oil Pressure Transmitter
◆Suitable for the measurement of high temperature (max. 175℃,low temperature, and normal temperature medium.
◆Reliable performance, good long-term stability.
◆Anti-impact, anti-vibration, anti-corrosive.
◆Reversed polar protection and current limiting protection.
Xi'an UTOP Measurement Instrument Co., Ltd. is one of the most reliable manufacturers and suppliers of oil pressure transmitter in China. Please feel free to buy high quality oil pressure transmitter at competitive price from our factory. If you have any enquiry about price list, please feel free to email us.
Oil Pressure Transmitter
Decription of Oil pressure transmitter
UPB8 oil pressure transmitter is designed for the measurement of high temperature medium, it uses special pressure sensors whose pressure diaphragm can be contacted by pressure medium directly. This product uses temperature radiation to isolate its amplifying circuits, this not only guarantees UPB8's small volume and good performance, but also make this product enhance the measured medium temperature range.
UPB8 oil pressure transmitter presently is widely used for measurement of high temperature gas or liquid in aerospace, petroleum chemical industry, electric power, food etc.
Features of oil pressure transmitter
◆Suitable for the measurement of high temperature (max. 175℃, low temperature, and normal temperature medium)
◆Reliable performance, good long-term stability
◆Anti-impact, anti-vibration, anti-corrosive
Specifications of oil pressure transmitter
| pressure medium | gas or liquid compatible to stainless steel |
| pressure ranges | -1...0~0.1bar...1000bar |
| pressure type | gauge(G), absolute(A), sealed gauge(S) |
| output signal | 4~20mA, 1~5V |
| accuracy | 0.25%FS, 0.5%FS(standard) |
| load resistance | RL=(U-10V)/0.02A(4~20mA output) U-loop voltage(V) |
| supply voltage | 10~30VDC |
| operating temperature range | -40~+120℃ |
| medium temperature range | -40~+175℃ |
| process connection | G1/2 or others |
| electrical connection | hirschmann connector or others |
| material of wetted part and housing | 1Cr18Ni9Ti |
Send Inquiry
