316 Stainless Steel Pressure Transmitter
●Full welding construction suitable for hard working conditions.
●High performance, all solid, corrosion resistant.
●Accept special customization.
●Strong anti-interference ability, long - term stability.
316 Stainless Steel Pressure Transmitter
Description of 316 stainless steel pressure transmitter
UPB11 full welded 316 stainless steel pressure transmitter is made based on silicon piezoresistive technology, The pressure sensor UPX19 with isolated stainless steel diaphragm is welded directly on the transmitter base. Full stainless steel welding construction, make the product to avoid the unreliable sealing problem due to medium incompatible with o-rings or O-ring aging.
This product has various output forms (including various analog models and RS485 digital signals etc.)
UPB11 full welded 316 stainless steel pressure transmitter is widely used for pressure measurement and control of petroleum, chemical-industry, metallurgy, power station and hydrology, etc.
Features of 316 stainless steel pressure transmitter
●Full welding construction suitable for hard working conditions
●High performance, all solid, corrosion resistant
●Accept special customization
●Strong anti-interference ability, long - term stability
Specifications of 316 stainless steel pressure transmitter
| pressure medium | gas or liquid compatible to stainless steel |
| pressure ranges | -1...0~0.1...1000bar |
| pressure type | gauge(G), absolute(A), sealed gauge(S) |
| overload pressure | 150%FS |
| output signal | 4~20mA, 0~5V, 0~10V, 1~5V,0.5~4.5V |
| accuracy | 0.1%FS, 0.25%FS(standard), 0.5%FS |
| load resistance | RL=(U-12V)/0.02A (4~20mA current output) U—loop voltage (V) |
| long-term stability | <0.2%FS/year |
| supply voltage | 12~32VDC |
| compensated temperature range | -10~+70℃ |
| operating temperature range | -30~+100℃ |
| temperature coefficient of zero | 0.2%FS/10℃ |
| temperature coefficient of span | 0.2%FS/10℃ |
| process connection | G1/4 or others |
| electrical connection | hirschmann connector( DIN43650) or others |
| material of wetted part | 1Cr18Ni9Ti |
| material of pressure membrane | 316L |
| material of housing | 1Cr18Ni9Ti |
| sealing | welded |
Previous: Flush Pressure Transducer
